ITEMS REQUIRED-INSTALL SCS WITH STANDARD HEADSET

SCS Fork, SCS Clamp, Integrated scooter deck, 1 1/8 Intergrated headet & 5MM Allen key.

Step 1. Slide one of the bearings from the Integrated headset over the fork arm- flat side down.

Step 2. Insert fork into the bottom of the deck headtube.

Step 3. Place the other bearing from the Integrated headset into the top of the deck headtube-flat side up.

Step 4. Slide the standard Compression ring over the fork so it fits snug between the bearing and the fork.

Step 5. Slide the headset dust cap over the fork stem - flat side down.

Step 6. Loosen bolts of SCS clamp with 6mm Allen then slide the bottom of the SCS clamp over the fork and align straight. 

Step 7. Insert the SCS top bolt and cap into top of clamp, tighten down using the 5mm allen key .

Step 8. Ensure everything is secure and fork spins freely.  Next step Install your bars. 

ITEMS REQUIRED- INSTALL SCS WITH LOW STACK HEADSET

SCS Fork, SCS Clamp, Integrated scooter deck,1 1/8 Intergrated low stack headet, 5MM Allen key and 6mm Allan key.

Step 1. Slide one of the bearings from the Integrated headset over the fork arm- flat side down.

Step 2. Insert fork into the bottom of the deck headtube.

Step 3. Place the other bearing from the Integrated headset into the top of the deck headtube-flat side up.

Step 4. Slide the low stack headset cap over the fork so it fits snug between the bearing and the fork.

Step 5. Loosen bolts of SCS clamp with 6mm Allen then slide the bottom of the SCS clamp over the fork and align straight.

Step 6. Insert the SCS top bolt and cap into top of clamp, tighten down using the 5mm allen key.

Step 7. Ensure everything is secure and fork spins freely.  Next step Install your bars.